In this article, we are going to tell you how to clean ceiling fans with vinegar. We will use vinegar and baking soda to clean the greasy ceiling fan blades instead of any chemical cleaners. It is one of the best and easiest way to clean ceiling fan blades in 2020. We tried our best to cover all the topics in our this step by step guide about cleaning ceiling fans with vinegar. Before you get started, I just want to mention those tools and materials that you will need to clean ceiling fans without making a mess.
Best Low Cost Ceiling Fans in 2020
Model # 59261
Indoor/Outdoor Ceiling Fan
Pull Chain Control
Multi Speed Revesible Motor
2 Down Rods
Wet Rated Outdoor Ceiling Fan
Pull Chain Control
4 Speed Quiet Reversible Motor
Tri Mount Positions
Ceiling Fan with Light
High Quality Reverse
Down Rod Mount
Model Brushed Nickel
Ceiling Fan with Remote Control
2 Mount Installation
Tools and Materials
- Phillips Head Screwdriver: This screwdriver will be used to remove ceiling fan blades for cleaning.
- Step Ladder: It helps you to reach the ceiling fan.
- Vinegar: Vinegar is being used to clean greasy ceiling fans.
- Baking Soda: Baking soda will be mixed with vinegar to make a solution to clean dirty ceiling fan blades.
- Old Pillow Case: You will clean ceiling fan with pillow case to remove dust and dirt.
- Old sheet: It collects the falling dust from the fan.
- Small Bowl: To make a solution of vinegar and baking soda.
- Toothbrush: Toothbrush will be used as a cleaning tool.
- Bucket: Bucket will be filled with water to clean the ceiling fan.
- Cleaning Cloth: It will also help you in cleaning.
- Voltage Tester: To Check the voltage after switching off the power breaker.
Clean ceiling fan with pillow case
First of all, switch off the power breaker. Use voltage tester to make sure that the power of the ceiling fan is off. Secondly, spread the old sheet on to the floor right under the ceiling fan to collect the falling dust from the ceiling fan. Thirdly, climb the step ladder to reach the ceiling fan.
Now, you have to open the pillow case and insert the fan blade into the pillow case. Rub all the surfaces of the fan blade by pushing the pillowcase in backward direction to collect dust and dirt. Repeat this process with each blade of ceiling fan.
Take cleaning cloth and wipe the motor head and all other parts of the ceiling fan. After wiping, take the cleaning cloth, pillowcase that is filled with the dust, and wrap up the sheet to keep them in a corner. It will help you to clean ceiling fans without making a mess.
How to remove ceiling fan blades for cleaning?
In this section of how to clean ceiling fans with vinegar, we are going to tell you how to remove ceiling fan blades for cleaning. For removing blades, you are going to need a step ladder, and a Phillips head screwdriver. Usually, the fan blades screws come with the Phillips head.
To remove ceiling fan blades for cleaning, take your Phillips head screwdriver, put it on the head of the screw that is located on the back of the blade, and unscrew it. There are usually three screws that hold the blades. Unscrew each of them one by one. But before untwisting the last screw, please hold the blade with the other hand to avoid dropping of blade.
How to clean ceiling fans with vinegar and Baking soda
To make a solution to clean greasy ceiling fans, all you have to do is to take 4 tablespoon vinegar, 4 tablespoon water, and 2 tablespoon baking soda. Put them in the small bowl and mix them up. Your cleaning solution is ready, now it’s time to do some cleaning.
Take the toothbrush, dip it in the cleaning solution, and apply the solution on the face, backside, edges, corners, and bracket of the fan blades by giving a good scrub. If the grease stains on your ceiling fan are very thick and tough then use the cleaning solution twice or even thrice by scrubbing hard with the help of cleaning toothbrush to remove them.
After applying cleaning solution and scrubbing with the toothbrush, now it’s time to take that fan blade to the sink for washing. Put it under water and rinse off. You can use the water from the bucket for washing of the ceiling fan blade. Give fan blades sometime for drying. Repeat this cleaning method with all the blades one by one. Now your fan blades are super clean.
To remove the stains from the down rod, canopies, motor head, and other parts of the ceiling fan you are going to need the remaining cleaning solution. If there is no solution left in the bowl, then you can make it in the aforementioned proportions.
Take a piece of cloth and cleaning solution, dip the cloth into the cleaning solution of vinegar and baking soda and rub the surface with cloth to remove the stains. After applying solution to your ceiling fan parts, you will notice that it is looking clean and clear. All the dust, dirt, and stains have gone.
Check you ceiling fan blades, if they are dry then put them back into the place. For doing this, take the Phillips head screwdriver again and tighten the screws and there you go that’s how to clean ceiling fans with vinegar and baking soda.
We hope that you will like our “how to clean ceiling fans with vinegar” article and it will help you in cleaning your ceiling fan. Cleaning the ceiling fan with vinegar not only saves the money but also gives a super clean ceiling fan. If you have any suggestions to make this article better then please let us know by commenting.